Dacor ER36D-C User Manual download pdf (Page 4)

Dacor●600AntonBlvd.Suite1000CostaMesa,CA92626●Phone:(800)793-0093●Fax:(626)403-3130●www.Dacor.com

STEP 16: Remove the two (2) torx screws from the bottom of the

handle.

STEP 17: Pull the end caps off the end of the handle and replace

them with the new ones.

STEP 18: Thread the two (2) torx head screws into the handle and

tighten them into place. CAUTION: Do not overtighten.

Tighten only by hand.

STEP 19: Line up the screw holes on the handle with the mounting

holes on the oven door. Make sure the screws that hold the

end caps in place face toward the bottom of the door.

STEP 20: Thread the two (2) screws through the door and into

the handle. Tighten them into place. Do not overtighten.

Damage to the door or the door glass may result.

STEP 21: On model ER36D: Replace the screw covers.

STEP 22: Remove the clamps or tape from the door.

Handle

Screw,

2 places

End Cap,

2 places

1 2 3 4

No comments

Dacor ER36D-C User Manual Page 4