
Wine Dispensing System Trim Kit Instructions
Page 6
STEP 9 Hold the top trim bracket in the mounting position on the top edge of the cut-
out. Center it using a ruler or tape measure
STEP 10 While holding the trim bracket in place, using a pencil, mark 3 pilot hole loca-
tions in the underside of the top of the cabinet cutout.
STEP 11 Drill 3 pilot holes for the top trim bracket using a 3/32” drill bit.
STEP 12 Attach the top trim bracket to the top front of the cabinet using (3) #10 x 1/2
Phillips head screws.
Top trim
bracket
Cutout
Top Trim Bracket Installation
Comments to this Manuals