Dacor HWO130PS Installation Guide download pdf (Page 8)

Verifying Package Contents

These items should come with the oven. Contact your dealer

immediately about missing/damaged items. Do not install a

incomplete/damaged oven.

• Installation Instructions, User Manual

• Mounting screws (wood, #6 x 3/4, Dacor PN 83331; 4 for single

oven, 6 for double oven)

• Standard oven racks (single oven: 1; double oven: 2)

• GlideRack™ oven rack (single oven: 2, double oven: 4)

• Broil grill and pan

• Dacor Stainless Steel Cleaner (s/s models only)

• Meat probe

Before starting installation, gather all needed items.

Removing An Oven Door

Remove the door(s) so the oven is lighter and easier to lift.

WARNING

• Do not detach the hinge catches after removing the door; the

springs could pop free and cause injury.

• Do not lift or carry the door by its handle.

• (Double ovens) Remove the bottom door first to reduce the risk of

damage.

1. Open the door fully.

Retaining

arm

Catch

Steps 1, 2

2. (Each hinge) With a pair of needle-nose pliers and slotted

screwdriver, rotate the catch over the retaining arm.

3. Lift the oven door to about a 15° angle from vertical.

Gripping

point

Gripping

point

4. Grasping with both hands just below the handle, lift the door

away from the oven.

Making the Electrical Connection

WARNING—SHOCK HAZARD

• If the electrical service does not meet the specifications on pg. 3,

postpone the installation, and have a licensed electrician the install

the proper wiring.

• Be sure to remove power to the oven before installation.

• Do not turn on power to the oven until it is properly grounded per

these instructions.

• The installer must connect the oven ground terminal (lead) to a

metal, grounded, permanent wiring system or grounding conductor.

• Do not use an extension cord.

• Do not install a fuse in the neutral or ground circuit.

• Connect the oven to the power supply with copper wire only.

IMPORTANT

Leave slack in the conduit so the oven can be slid forward for service

without disconnection.

NOTE

The leads from the oven conduit may be a smaller gauge than the

wiring of the dedicated supply circuit but are compatible with house-

hold wiring under National Electric Code jurisdiction and/or the local

inspection authority.

1. Turn off power to the circuit to which the oven will be con-

nected at the circuit-breaker panel or fuse box.

2. Position the oven directly in front of the cabinet cutout.

3. Feed the appliance conduit into the junction box and attach it

using a UL-approved strain relief.

4. Per local code, connect to one of these systems (see Pgs. 8, 9):

• 4-wire electrical system

• 3-wire electrical system

• 3-wire electrical system w/external ground.

Steps 3, 4

INSTALLATION INSTRUCTIONS

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 23 24

Comments to this Manuals

No comments

Dacor HWO130PS Installation Guide Page 8

Comments to this Manuals

Related products and manuals for Unknown Dacor HWO130PS