Dacor REMP3 User Manual download pdf (Page 2)

IMPORTANT SAFETY INSTRUCTIONS

WARNINGS:

1. Read all instructions before

using the appliance.

2. Install or locate this appliance

only in accordance with these

installation instructions.

3. Do not operate this appliance

if it has a damaged electrical

conduit or wires, if it is not

working properly or if it has

been damaged or dropped.

4. This appliance should be

serviced only by qualified

service personnel. Locate

the nearest Dacor authorized

service representative at

(800) 793-0093, or at

www.Dacor.com for

examination, repair or adjust-

ment.

5. If the information in this

manual is not followed exactly,

a fire or explosion may result

causing property damage,

personal injury, or death.

6. Do not store or use gasoline

or other flammable vapors and

liquids in the vicinity of this or

any other appliance.

7. Improper installation,

adjustment, alteration,

service, or maintenance can

cause personal injury or

property damage. Refer to

these instructions and the

accompany ing use and care

manual. For assistance or

additional information, consult

a qualified installer, service

agency, or dealer.

8. Keep appliance area clear

and free from combustible

material.

9. To reduce the risk of fire, use

only approved duct work

materials.

10. TO REDUCE THE RISK OF

FIRE, ELECTRIC SHOCK,

OR INJURY TO PERSONS,

OBSERVE THE FOLLOWING:

a) Use this unit only in the

manner intended by the

manufacturer. If you have

questions, contact the

manufacturer.

b) Before servicing or cleaning

unit, switch power off at

service panel and lock

the service disconnecting

means to prevent power

from being switched on

accidentally. When the

service disconnecting means

cannot be locked, securely

fasten a prominent warning

device, such as a tag, to the

service panel. Exception: The

additional safety instructions

do not apply to a ceiling-

suspended fan.

11. For General Ventilating Use

Only. Do Not Use To Exhaust

Hazardous Or Explosive

Materials And Vapors.

WARNING:

To reduce the risk of fire and

electric shock, when installing

EHDR series hoods, DO NOT

install more than one in-line or

external blower to increase the

length of the duct run. Even

small differences between

blower air flow rates can greatly

reduce the air draw by the hood.

Install only the in-line or remote

blower models specified in these

instructions.

WARNING:

To reduce the risk of fire and

electric shock, when installing

EHD and MHD series hoods, DO

NOT install an in-line or external

blower to increase the length

of the duct run. Even small

differences between blower air

flow rates can greatly reduce the

air draw by the hood.

WARNING:

To reduce risk of fire and to

properly exhaust air, be sure to

duct air outside – Do not vent

exhaust air into spaces within

walls or ceilings or into attics,

crawl spaces or garages.

WARNING:

TO REDUCE THE RISK OF FIRE,

USE ONLY METAL DUCT WORK.

WARNING:

TO REDUCE THE RISK OF FIRE,

ELECTRIC SHOCK, OR INJURY

TO PERSONS, OBSERVE THE

FOLLOWING:

a) Installation work and

electrical wiring must be

done by qualified person(s)

in accordance with all

applicable codes and

standards, including fire-rated

construction.

b) Sufficient air is needed

for proper combustion

and exhausting of gases

through the flue (chimney)

of fuel burning equipment

to prevent back drafting.

Follow the heating equipment

manufacturer’s guidelines

and safety standards such

as those published by the

National Fire Protection

Association (NFPA), and

the American Society for

Heating, Refrigeration and

Air Conditioning Engineers

(ASHRAE), and the local code

authorities.

c) When cutting or drilling into

wall or ceiling, do not damage

electrical wiring and other

hidden utilities.

d) Ducted fans must always be

vented outdoors.

1 2 3 4 5 6 7 8

Comments to this Manuals

No comments

Dacor REMP3 User Manual Page 2

Comments to this Manuals

Related products and manuals for Small kitchen appliances Dacor REMP3