Dacor RENAISSANCE RDW24I Specifications

Installation InstructionsRenaissance® Built-in Dishwasher Models RDW24S and RDW24IPart No. 105671 Rev. B

8Installation InstructionsVerify the Package Contents• Remove all styrofoam and plastic wrap from the dishwasher. Be sure to remove the toe kick from

9Handle Installation (Model RDW24S)Install the door handle according to the handle installation instructions.Door Panel Installation (RDW24I Only)IMPO

10Installation InstructionsCustom Door Panel Installation (cont.):5. Open the door slightly and use the six (6) supplied 1 3/4” screws to secure the

11Installation Instructions6. Reattach the front end of the spring by pulling it up and forward to fasten it in the mount.7. Open the door and check

12Installation Instructions7. Connect the ground (green) wire on the cable using a loop or spade terminal to the ground connection screw located on t

13Installing the Unit in the Cabinet1. Position the dishwasher in front of the cutout. Make sure the drain hose, water supply line and power cable ar

14Installation InstructionsDrain Line Connection CAUTION• For proper dishwasher operation and drainage, the drain line must be routed through the bot

15Final Leveling1. Check to make sure that adjacent drawers and cupboards can be opened when the dishwasher door is open. Reposition the dishwasher i

16Installation InstructionsInstallation Checklist WARNING• To ensure a safe and proper installation, the following checklist should be completed by t

Installation Instructions ... 8Verify the Package Contents ...8Installation Preparation ...

Dacor●600AntonBlvd.Suite1000CostaMesa,CA92626●Phone:(800)793-0093●Fax:(626)403-3130●www.dacor.comItem No., 80 933 28 Rev. 02

1Important Information About Safety Instructions• The Important Safety Instructions and warnings in these instructions are not meant to cover all pos

2Important Safety Instructions• Use this dishwasher only for its intended purpose as outlined in the use and care manual. It is not intended for comm

3Product SpecificationsProduct DimensionsShipping weight: 117 lbs. (53 Kg)3 3/8” (8.6 cm)2 7/8” (7.3 cm)BackDo not modifyloop in hose54” (137.0 cm) lo

4Grounding Instructions for a Permanently Connected ApplianceThis unit must be grounded to operate properly. It must be connected to a grounded metal,

5Preparing the Location WARNINGFollow all cabinet dimensions shown to insure safe operation. All minimum product dimensions must be met or exceeded (s

6Preparing the Drain CAUTIONKeep the factory installed high loop drain hose in place to ensure proper dishwasher operation. Do not modify or move the

7Waste Tee Installation without Air GapDisposer Installation without Air Gap Disposer Installation with Air GapFloor20” min.Waste teeSink trapKeep hig