Dacor ER3OD User Manual download pdf (Page 27)

Cooktop Disassembly

• When the cooktop is cool, remove the grates from the

top of the cooktop,

• Lift the burner caps and burner rings off of the burn-

ers, Remove the burner head from the crown burner,

Cleaning the Grates, Spill Trays and WOK Ring

• The grates, spill tray and WOK ring are coated with

a porcelain finish, For everyday cleaning, use a soft

cloth or non-abrasive pad with warm soapy water to

clean all of the porcelain parts,

• If necessary, tough stains may be removed by apply-

ing full strength sprays such as Simple Green, Ajax

All-Purpose Cleaner or Formula 409, To minimize

wear, use the mildest cleaner needed to get the sur-

face clean,

For extremely stubborn stains, you may use a mildly

abrasive cleaner or applicator, such as Soft Scrub,

Bon Ami, S,O,S, pads or other soap-filled steel wool

pads, Use these cleaners with extreme care and only

on occasion, Extensive use of these types of abrasives

will eventually damage the porcelain enamel,

Cleaning the Burner Components and Igniters

CAUTION

Reassemble the cooktop according to the burner and

grate assembly instructions starting on page 7, Test

the burners after reassembling them, If the flame is

uneven, be sure that the brass burner ring and por-

celain burner cap are properly positioned, then check

for any remaining dirt or grime on the burner parts

or igniter, If erratic clicking is still present, make sure

the igniter is completely dry, If the unit still exhibits

problems after drying, call your local Dacor Authorized

Service Agent,

IMPORTANT= The igniter(s) will not work properly if the

burner cap, burner ring, burner base or the igniter itself

are not clean. Dirty or wet igniters may not spark at all.

1. After disassembling the burners, check for any dirt or

grime deposited on the individual parts, including the

igniters.

2. Use a firm tooth brush to gently clean completely

around the igniter, including all of the metal top and

porcelain base. Do not use water to clean the igniters.

If necessary, use a small amount of rubbing alcohol to

help dissolve grime.

3. Examine the burner rings. Remove anything stuck

in the holes with a straightened paper clip, wire or

needle. Be careful not to scratch or damage the ring

and cap. Do not distort the shape of the burner ring

holes.

Clean all the burner parts, including the burner bases,

with window cleaner or rubbing alcohol, Use a clean-

ing brush with plastic bristles or a firm tooth brush,

When done, rinse the parts well with clean water, Dry

all the parts thoroughly before reassembling them,

Burner

( cao

Burner

ing

Burner

head

Igniter Burner

ase

Crown Burner Parts

Burner

'n on,te

base

Stack Burner Parts

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 35 36

Comments to this Manuals

No comments

Dacor ER3OD User Manual Page 27

Comments to this Manuals

Related products and manuals for Ovens Dacor ER3OD