Dacor ER36D-C Troubleshooting Guide download pdf (Page 19)

Page 9-5

SECTION 9 - COMPONENT REPAIR

Door Hinges (continued)

Grab the front door glass assembly with both

hands and remove it.

•

Remove the two (2) hinge cover screws F

over the hinge to be removed and pull off the

hinge co

ver G .

emove the hinge retainer screw H for the

hinge to be remo

ved.

•

Carefully pry up the hinge I up and out of

the door.

After installing the hinge, replace the hinge

cover and the three (3) screws that hold the

hinge assembly in place.

Reassemble the door. When putting the front

door glass assembly back in place, be careful

not to knock loose the door spacers which are

glued to the top corners. Also, make sure the

tabs E on the bottom rest on the outside of

the door liner

Reinstall the screws on the bottom of the

door, then grasp the top of the door with both

hands and turn it over.

On ER48D Only: Hold the top end of the door

up with one hand. Position the handle under

the door and lower the door on top. Replace

the handle screws. Do not over-tighten.

Reinstall the oven door. See the Door

Installation section on page 8-2.

•

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 47 48

No comments

Dacor ER36D-C Troubleshooting Guide Page 19