11
Care and CleanInG
Step 1: Orient the filter so that the two mounting tabs are
towards the rear, open end down.
Removing and Installing the Convection Fan Filter
Step 1
Removing and Installing the Convection Fan Filter
Step 2
Oven racks are chrome-plated. For everyday cleaning, apply a
solution of detergent and hot water. To clean heavy soil, use a
scouring pad such as steel wool with plenty of water, or use a
solution of 1 cup ammonia to 2 gallons of water. Remove racks
during Self-Cleaning. If racks are left in the oven during self-
cleaning, they will permanently discolor.
Oven raCks
COnveCTIOn fan fIlTer
The oven broiler pan and grill is finished in porcelain enamel.
Clean both components in a solution of detergent and hot water.
For heavy soil conditions, use a scouring pad such as steel wool
with plenty of water. Rinse well after cleaning
brOIler pan & GrIll
WARNING
Remove the filter only when it is cool.
Step 2: Hook the two mounting tabs over the center
horizontal bar.
Clean these surfaces with a solution of mild detergent and warm
water. Rinse, dry and polish with a soft, lint-free cloth.
Brass, Chrome, and Copper finishes are protected with a clear
coat enamel and should not be cleaned with metal polishes.
brass, ChrOme & COpper
s
UrfaCes
The oven interior and inner door liners are finished in porcelain
enamel. Clean these surfaces with a solution of mild detergent
and hot water. Rinse and dry with a soft cloth. Do not use
abrasives or commercial oven cleaners. Always remove excess
grease and soil from the oven interior and door prior to using the
Self-Cleaning cycle.
pOrCelaIn sUrfaCes
The convection fan filter is made of stainless steel. Remove the
filter regularly for cleaning, as a clogged filter will reduce the
effectiveness of convection cooking modes. Soak the filter in
hot soapy water. Dry the filter completely before re-installing.
Remove the filter during Self-Cleaning. If the filter is left in the
oven during Self-Cleaning it will permanently discolor. Re-install
the filter before cooking in the oven again. Failure to do so
will expose the convection fan blade that rotates at high
speed during convection modes.
Comments to this Manuals