Dacor DOC30M977DS Installation Manual download pdf (Page 23)

English 23

Installation instructions

Electrical connection

WARNING

Electrical Shock Hazard

• Disconnect power before servicing.

• Use 8-gauge, solid-copper wire.

• Ground the oven.

Failure to follow these instructions can cause electrical shock, fire, or death. This oven is

manufactured with a neutral (white) power supply wire and a cabinet-connected ground

(green or bare) wire twisted together.

1. Disconnect power.

2. Feed the flexible conduit from the oven

through the opening in the cabinet.

3. Remove the junction box cover, and

install a UL-listed or CSA-approved

conduit connector to the junction box.

4. Route the oven's flexible conduit to the

junction box through a UL-listed or

CSA-approved conduit connector.

5. Tighten conduit connector screws.

6. See the chart on pg. 24 to complete

installation for your electrical

connection.

UL-listed or

CSA-approved

conduit

connector

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 95 96

No comments

Dacor DOC30M977DS Installation Manual Page 23