Dacor ER3OD User Manual download pdf (Page 25)

2. Clean soil from the porcelain surfaces of the door

outside of the door gasket. Rinse surfaces well with

a solution of vinegar and water, then wipe dry. Heav-

ily soiled areas may be cleaned with a non-scratching

scouring pad.

3. Clean the door gasket by dabbing it with a solution of

water and mild soap.

Your Oven's Self-Clean Feature

About the Self-Clean Cycle

• The oven will run better and produce better baked

goods when it is clean, During self-cleaning, the

oven is heated to very high temperatures which burn

off any deposits on the surfaces of the oven, Self-

cleaning eliminates the need for manual scrubbing of

interior surfaces, The self-clean process takes about

three hours,

It is normal for the oven to emit smoke during the

first few self-clean cycles. It is also normal for the

oven to emit popping sounds during self-cleaning.

These sounds are caused by the expansion and con-

traction of metal surfaces when the oven heats up and

cools down.

• Self-clean mode will not function if the meat probe is

connected.

How to Use the Self-Cleaning Feature

Before self-cleaning the oven, remove the racks, the

convection filter, all cookware (pots, pans, forks, etc.),

the meat probe, foil and any other loose objects from

the oven chamber. See page 26 for instructions on

how to remove and clean the filter.

4. Turn on kitchen fans or vents to help remove odors

during the self-clean cycle.

5. Make sure the oven door is shut.

6. Press the SELF CLEAN key.

7. Press START.

The control panel automatically locks the oven door

during self-cleaning. The latch prevents the door from

being opened since the high interior oven temperatures

can easily cause injury. If the door is not shut, "DOOR"

will appear on the display. To correct the problem, press

CANCEL/SECURE and wait approximately one minute,

then close the door. When the door is properly closed,

start the self-clean process again.

The display shows the self clean cycle status:

• "CLEAN" indicates that self clean is in process.

• "LOCK" indicates that the door is latched.

• "ON" indicates that the heating elements are on.

If you want to stop the self-clean cycle, press the

CANCEL/SECURE key. Keep in mind that the oven door

will remain locked until it is safe enough to open. "LOCK"

will disappear from the display when the door lock is

released. You will still need to exercise caution when the

door lock is released because the inside of the oven may

still be hot.

After the Self-Clean cycle is Complete:

• The door latch will release when the inside has cooled

down. The words "CLEAN", "LOCK" and "ON" will

disappear from the display. Exercise caution because

the oven will still be hot (about 400°F) at the time the

door lock is released.

Reinstall the convection filter and oven racks before

using your oven.

You may notice a powder ash residue in the bottom

of the oven after self-cleaning. This is normal. Use a

damp cloth or sponge to wipe up the residue after the

oven cools down.

Continued,,,

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 35 36

Comments to this Manuals

No comments

Dacor ER3OD User Manual Page 25

Comments to this Manuals

Related products and manuals for Ovens Dacor ER3OD