Dacor ER3OD User Manual download pdf (Page 30)

Replacing the Light Bulbs

WARNING

Light bulb replacement is considered to be a homeowner

maintenance operation. If the lights do not work, before

replacing them, please consult the Problem Solution

Guide on page 30.

IMPORTANT: Do not touch the replacement halogen light

bulb with your fingers. Halogen bulbs are sensitive to the

oils from your hand. The oils from your hand will stick to

the bulb and may cause it to burn out faster than normal.

To replace the light bulbs, follow these steps:

1. Replace the light bulb only with Dacor part number

100429. See the facing page for ordering information.

2. Turn off power to the range at the circuit breaker

panel or fuse box.

3. Hold your hand under the lens for support and gently

pry it loose using a spatula or table knife. Pull the lens

cover straight out.

4. Grasp the old bulb and pull it straight out of the

socket.

S. Using a glove, insert the new bulb into the socket.

6. As you reinstall the lens cover, line up the cutout on

the inside rim with the light socket. Gently press it

into its original position.

7. Turn the power to the range back on. Reset the clock

(see page 9).

Lens

Light bulb

Light

socket

Lens cutout

Light fixture

in oven wall

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 36

No comments

Dacor ER3OD User Manual Page 30